It is very important that you follow the product information, such as the year of manufacture (not to be confused with the year of registration), axle weight distribution, vehicle power, and all other notes and comments that appear.
Some references of springs of the prokit or sportline range can vary the color of the spring due to requirements of the brand, for example Abarth requires that all its springs be red, therefore, you can receive springs of the prokit range (black) in red, or Porsche Pro-kit springs in green instead of the usual black, this is nothing more than a requirement of the manufacturer and does not influence the behavior, the lowering, or the homologation process.
Springs Notes:
Although there is data such as the type of rear axle (rigid/independent), shock absorber diameter, type of mounting, etc. that are not included in the vehicle's technical sheet and must be consulted with the frame, these are the basic data that you should consult there.
If you have any questions, please contact us.
- BRAND
- MODEL
- ISSUE DATE
- WEIGHT DISTRIBUTION AXLE (1st / 2nd), the first being the front and the second the rear.
- HEIGHT
- ENGINE CODE
- FUEL (D:Diesel,G:Gasoline,E:Electric etc....)
- CYLINDER CAPACITY
- POWER (kW)
Visually, for some platforms such as the VAG Group, we can also visually differentiate both types of rear axles, with completely different springs between both options.
Rigid Axis:
Independent axle, multi-link axle, multi-link axle:
NOTES AXLE WEIGHTS:
Particular attention must be paid to axle weight distribution to ensure the height indicated on the product.
The maximum weight indicated on the product must be immediately higher than that indicated in the vehicle's technical data sheet.
Example: Vehicle weight front axle / rear axle: 980 kg / 920 kg
Option A: Maximum front axle weight 990/950 kg -> Correct option.
Option B: Max front axle weight 1100/950 kg -> Incorrect option.
SEPARATOR NOTES:
The separators are sold in kits of 2 units (1 axis).
Mounting systems 1 and 2 do not include fixings (screws/studs) and these are not sold individually.
The type of fastening is given by the number that appears after S90- in the product reference.
Anchoring guide for Eibach spacers
GENERAL NOTES:
Each product may have one or more assembly notes associated with it that must be followed .
This is a list of common notes (in English):
| 7. | The spring plates installed by the manufacturer are available at DB specialist workshops in sizes 8-23 mm. This allows to vary the lowering indicated here. |
| 9. | For tire equipment 205/50/15 and rim 7J x 15. Recommendation: installation of sports gas pressure shock absorbers of similar construction. |
| 10. | Part number is available only from our special distributor. Please ask for availability and price. |
| 12. | Not lowered by manufacturer. (OE-sport suspension) |
| 15. | Not fully equipped. |
| 16. | The special equipment mentioned below contents following point system: air-condition 7 points automatic-transmission (4+5 Cyl.) 4 points automatic-transmission (6 Cyl.) 2 points independent car heating 3 points 2-point sunroof ABS 2 points 1-point airbag headlamp cleaning system 1 point engine skid plate 1 point electronic seat adjustment 2 points IF THE RESULT IS MORE THAN 4 POINTS ONE HAS TO CHOICE up to 7 points 8 mm (1 point rubber plate) up to 13 points 13 mm (2 point rubber plate) up to 21 points 23 mm (4 point rubber plate) More than 21 points the lowering Kit is for this version not possible |
| 18. | Without leveling control. |
| 19. | Vehicles with 6 cylinder engine require retrofit with sports shocks. |
| 20. | Except 4WD vehicles. |
| 21. | Except electronic suspension systems. |
| 22. | In combination with Eibach suspension springs or original suspension. |
| 23. | Front and rear axle height adjustable by threaded strut. |
| 24. | Front axle height adjustable by threaded strut, rear axle by height adjustable unit. |
| 25. | In order to ensure sufficient clearance it may be necessary to use wheel spacers if the car is equipped with original wheel sizes. |
| 26. | When the car is lowered more than 40 mm in combination with a drive shaft diameter more than 42 mm, the original equipped front stabilizer bar has to be replaced by the EIBACH Anti-Roll-Kit part.-no. E40-85-005-01-11. |
| 28. | Only for vehicles with electronic drive-balance-control. |
| 30. | Height adjustment only according to the measurements indicated in the TÜV-certificate. |
| 31. | Only for vehicles with ABC-Suspensions. |
| 32. | Except "Sportive" and Sport models (models were equipped with Bilstein shock absorbers) |
| 33. | Available while stocks last! |
| 34. | Only for vehicles with a front shock absorber diameter of 55 mm |
| 35. | Only for vehicles with a front shock absorber diameter of 50 mm |
| 36. | For vehicles with EDC the following parts must be purchased separately: front: BMW-Part-No.: top mount assembly (31 331 091 709 + 31 331 116 983 + 31 331 110 196) rear: BMW-Part-No.: top mount assembly (33 521 091 710 + 33 521 090 282 + 33 521 092 986 + 31 331 137 932 + 33 531 091 031) |
| 37. | Only front axle height adjustable, rear axle spring and shock absorb |
| 38. | Only front axle height adjustable, rear axle shock absorb |
| 39. | For models from 04.2002 onwards the fixation of the piston rod is deepened and covered through a flap (piston rod thread not visible) |
| 42. | The spring travel dependent brake-pressure regulator at the rear axle has to be inspected and, if necessary, adjusted according to the workshop manual. |
| 43. | The original level control damper at the rear axle has to be replaced by the original rear damper of the sedan (MMC part-no.: MR 235612) or damper of the manufacture KONI, type: 8040-1234 SPORT. The original rear bumpstops are to be reused. The bumpstops have to be in technically faultless condition. |
| 44. | The original rear dampers have to be replaced by the supplied dampers. |
| 45. | In some cases additional OE-Parts for the installation of the suspension components are required. Therefore please take a look at the corresponding technical documents which are available on our website. |
| 46. | Without STOW'N GO |
| 47. | The original rear dampers have to be replaced by conventionally dampers. |
| 48. | In the case of vehicle models with ride height control dampers (mark 2R or 4R) these must be changed to OE dampers with mark 1U or 3U, part number: 96 80 99 98, catalog number: 48 06 443. |
| 49. | For vehicles with 4WD only! |
| 50. | Only for vehicles with 51mm front strut clamp. |
| 51. | Part number is available only on request. |
| 52. | Only for vehicles with single leaf spring. |
| 53. | Only for vehicles with double leaf spring and single leaf with distance part. |
| 54. | Not for vehicles with ride-height control system. For vehicles with Off-Road Classification only allowed with pass-by-noise less than 75 dB(A) and change of classification to M1. |
| 56. | Vehicles with combined fog- and running lights have to be checked whether the height of the lower edge of the light is not closer than 350 mm to the ground. In this case additional running lights have to be mounted higher than 350 mm. The original running lights have to be decommissioned by removing the bulbs in the cable connection. |
| 57. | Only for vehicles with OE 15" tires. |
| 58. | Not suitable for model "Cross" |
| 59. | Only for vehicles with following characteristics: front axle: steel spring, rear axle: leveling control |
| 60. | Excluded Colt Rallyart up to 2009 |
| 61. | Strut fixing with screw M14 (4-hole wheel attachment) |
| 62. | Strut fixing with screw M16 (5-hole wheel attachment) |
| 63. | From addition 14 |
| 64. | Please check your fin: this kit fits: 10th character=number (…., 8, 9) |
| 65. | Please check your fin: this kit fits: 10th character=letter (A, B, ...) |
| 66. | for 5-Seater |
| 67. | For 7-Seater |
| 68. | Increased axle-load when using trailer (see TÜV approval). |
| 69. | If a national individual type approval exists, it is necessary to approve a modification acceptance according to §19/2 StVZO. |
| 70. | Electronic damper control systems at vehicles have to be deactivated. |
| 71. | Without type: 1.6 Racing (DS3) |
| 72. | Part number is available only on special order. |
| 73. | Front wheel drive |
| 74. | Original spring plate must be used |
| 75. | Without AC (Air-Conditioning) |
| 76. | Thread dimension: M12 |
| 77. | Outer diameter front strut 45 mm |
| 78. | Due to the usage of gas pressure technology of the B6 / B8 dampers the dimension of lowering may vary slightly vehicle-specifically. |
| 79. | Coilspring inner diameter 116mm |
| 80. | Coilspring inner diameter 106mm |
| 81. | Without 3 rows of seats |
| 82. | Distance between fixing holes front 58mm |
| 83. | Distance between fixing holes front 75mm |
| 84. | Not available for vehicles with xenon headlights (any mounting for the self-leveling headlamp system at the dampers) |
| 85. | Thread dimension: M16 |
| 86. | Short wheel-base |
| 87. | without off-road type |
| 88. | Standard suspension |
| 89. | Thread dimension: M10 |
| 90. | Thread dimension: M14 |
| 91. | With drum brake |
| 92. | With disc brake |
| 93. | Only for vehicles with base axle |
| 94. | Only for vehicles with plus axle |
| 95. | Only for struts, which are screwed together |
| 96. | Without ABS |
| 97. | Without 1BH (Off road package) |
| 98. | With coil spring suspension |
| 99. | Outer diameter front strut 47 mm |
| 101. | Once B12 kit is installed the electronic damper control will not be available anymore. You will see a trouble code. This can be re-programmed by an official garage/dealership. |
| 102. | For campmobiles |
| 103. | Up to chassis number: 200011 ; up to chassis number: 3B-YE121222 |
| 104. | Up to chassis number: 3B_YE121221 |
| 105. | Up to chassis number: 3B-YE121222 |
| 106. | Up to chassis number: 41999999 |
| 107. | Up to chassis number: 48999999 |
| 108. | Up to chassis number: 4B-Y-200000 |
| 109. | Up to chassis number: 4D-Y-020000 |
| 110. | Up to chassis number: 8D-1-030000 |
| 111. | Up to chassis number: 8D-1-030001 |
| 112. | Up to chassis number: 8D-X-200000 |
| 113. | Up to chassis number: 8E-2-400 000 |
| 114. | Up to chassis number: 8E-5-400 000 |
| 115. | Up to chassis number: 8E-7-400 000 |
| 116. | Up to chassis number: A394035 |
| 117. | Up to chassis number: YS3ES55CD1 |
| 118. | For type: Avantgarde |
| 119. | For type: Avantgarde, Elegance |
| 120. | Except type: JC Works GP |
| 121. | Except type: "iL" |
| 122. | For type: G02 |
| 123. | For type: G02, GT, GTI |
| 124. | For type: G07, G08 |
| 125. | For type: G07, G08, G09, G11 |
| 126. | For type: G07, G08, G09, G11, GT, GTI |
| 127. | For type: G29, G30 |
| 128. | For type: M 030 |
| 129. | For type: M 033, except type M30 Turbo |
| 130. | For type: without EDC |
| 131. | From chassis number: 199008-> 199209 |
| 132. | From chassis number: 199210 -> |
| 133. | From chassis number: 3B-YE121222 -> |
| 134. | From chassis number: 4B-1-000001 -> |
| 135. | From chassis number: 4B-W-070001 -> |
| 136. | From chassis number: 4B-W-070001-> 4B-Y-200000 |
| 137. | From chassis number: 4D-1-000 001 -> |
| 138. | From chassis number: 51000001 -> |
| 139. | From chassis number: 8D-1-030000-> 8D-W-006471 |
| 140. | From chassis number: 8D-1-030001 -> |
| 141. | From chassis number: 8D-1-030001 ->;from chassis number: 200007 -> |
| 142. | From chassis number: 8D-W-006471-> 8D-1-030000 |
| 143. | From chassis number: 8D-X-200000 -> |
| 144. | From chassis number: 8D-X-200001-> 8D-1-030000 |
| 145. | From chassis number: 8E-2-400001 -> |
| 146. | From chassis number: 8E-5-400 001 -> |
| 147. | From chassis number: 8E-7-400 001 -> |
| 148. | From chassis number: A394035 -> |
| 149. | From chassis number: A394036 -> |
| 150. | From chassis number: F054768 -> |
| 151. | From chassis number: YS3ES55CD2 -> |
| 152. | For Japan |
| 153. | Not for distribution in China (Taiwan) |
| 154. | Only in combination with Bilstein Teile-Nr. /part-no. AC0-H454 - only available at Bilstein. |
| 155. | Only in combination with BMW part-no. 31 32 1 139 423 (2x) - only available as BMW-OE-parts. |
| 156. | Only in combination with BMW part-no. 31 33 1139 436 - only available as BMW-OE-parts (top mount) |
| 157. | Only in combination with Bilstein Teile-Nr. /part-no. AC0-H454, available on special order only. |
| 158. | Without CATS |
| 159. | Without EDC |
| 160. | If replacement required: You will find the components in the homologation under the point "Amendment of the vehicle documents". The homologation can be downloaded on: www.eibach.de - Performance Suspension“ |
| 161. | If replacement required: Please contact |
| 162. | Not for "Caddy Maxi" |
| 163. | "LPG-(liquefied petroleum gas)-system"-engines included! |
| 164. | Only in combination with BMW part-no. 33 50 6 778 572 (2x) - only available as BMW-OE-parts (stoneguard) |
| 165. | Only in combination with Bilstein Teile-Nr. /part-no. 50-174546 - only available at Bilstein: |
| 166. | Land of production: Great Britain |
| 167. | Up to chassis number: 7L-9-045000 |
| 168. | Only for cars with PASM (electronic damper control). |
| 169. | Part number is available only on special order. |
| 170. | For cars with independent suspension at the rear axle. |
| 171. | For cars with rear live axle. |
| 172. | Only for Gran Coupé |
| 173. | Only for Coupé |
| 174. | Not for suspension strut at the rear axle. |
| 175. | For vehicles with electronic damper control. (Series). PRO-TRONIC suppresses the error message after installation of dampers or coil-overs (B12/PSS) without electronic adjustable dampers. The functionality of electronic damper control is not applicable. |
|
176. |
For vehicles with electronic damper control. (Series). PRO-TRONIC suppresses the error message after installation of the coil-over-suspension (PSS). The functionality of electronic damper control is not applicable. The kit includes the PRO-TRONIC-unit. |
| 177. | Vehicle with electronic damper control (Series) requires the PRO-TRONIC-unit AM65-20-030-01-22. Please order separately. |
| 178. | For "Crosstouran" |
| 179. | Vehicles of the category M1G (Offroad) must be reclassified as M1. |
| 180. | from chassis number: WAUZZZ8....11201 |
| 181. | for vehicles without AMG-suspension |
| 182. | for vehicles with AMG-suspension |
| 183. | not for "STI" |
| 184. | Spring plate may be changed! - Kit E8530-140 may require OE-Spring-Plate No. 1HO412341. Kits E8547-140 and E8550-140 may require OE-Spring-Plate No. 357412341A. |
| 185. | up to chassis number: KNEJC524875 644 788 |
| 186. | from chassis number: KNEJC524875 644 789 |
| 187. | from chassis number: WAUZZZ8....11201 |
| 188. | for type: G01, G02, 0N4 |
| 189. | for type: G01, G02, 0N1 |
| 190. | for type: G03, G04, G05, G06, G07, 0N4 |
| 191. | for type: G03, G04, G05, G06, G07, 0N1 |
| 192. | Only for vehicles without PASM (electronic damper control). |
| 193. | Only for vehicles without air suspension. |
| 194. | for type: ZFA, not for type 3C3 (USA) |
| 195. | not for type 3C3 (USA) |
| 196. | Damper length: FA: 564 mm, RA: 666 mm |
| 197 | Damper length: FA: 543 mm, RA: 645 mm |
| 198. | Stabilizer diameter 20mm |
| 199. | Stabilizer diameter 21mm |
| 200. | for type: 0N9 |
| 201. | for type: 04N |
| 202. | for type: G46, G57, G10 |
| 203. | for vehicles with EDC (electronic damper control) |
| 204. | for type: G01, G04, 0N1 |
| 205. | for type: G01, G04, 0N4 |
| 206. | for type: G01, 0N1 |
| 207. | for type: G01, 0N4 |
| 208. | for type: G02, 0N1 |
| 209. | for type: G02, 0N4 |
| 210. | Only Export - nor available in Germany - only without homologation! |
| 211. | long wheel base |
| 212. | Not for "Nürburgring-Edition" (211 HP) |
| 213. | Pigtail-end above |
